Westbalt
Kuvatakse 937–960 tulemust 8122-stSorted by latest
-
-
-
Taskulambid, kandelambid
Pealamp EMOS CREE+SMD,110Lm,55m,Li-Pol 850mAh
Tootja ID: P3535• source of light 3 W CREE LED + SMD
• beam distance 3 W LED 100 % – 55 m, 3 W LED 50 % – 35 m, 4× SMD – 15 m
• burn time 3 W LED 100 % – 5,5 h, 3 W LED 50 % – 7 h, 4× SMD – 3 h
• power source Li-Pol 850 mAh
• LED maximum luminous flux 3 W LED 100 % – 95 lm, 3 W LED 50 % – 35 lm, 4× SMD – 110 lm
• modes: right button: 3 W LED 100 %, 3 W LED 50 %, 4× SMDSKU: 022540 -
Taskulambid, kandelambid
Pealamp CREE XPG LED + COB LED (valge, roh., pun.)
Tootja ID: P3531Handy water-resistant and impact-resistant CREE LED headlamp, an ideal assistant wherever you need a light but do not have your hands free. Includes a high-quality strap with LED indication, hook for hanging and safety whistle.
The head lamp is fitted with a hook for hanging, a whistle for e.g. calling for help, and has a red light attached to the back of the strap.
• source of light CREE XPG LED + COB LED (white, green, red) + red LED (rear light)
• beam distance CREE XPG LED + COB white – 54 m, CREE XPG LED 100 % – 54 m, CREE XPG LED 50 % – 30 m, COB white – 15 m
• burn time CREE XPG LED + COB white – 16 hours
• power source 3× AAA 1.5 V, 1× CR2032 3 V (rear red light-included)
• LED maximum luminous flux CREE XPG LED + COB white – 330 lm, CREE XPG LED – 260 lm, COB LED – 130 lm
• modes: right button: COB white, green, red, off; left button: CREE XPG LED + COB white,CREE XPG LED: 100 %,50 %,flashing,off; rear light:100 %, flashing, offSKU: 029127 -
Trafod
Toiteplokk LED lampidele 25…40V 900mA 40W Tridonic
Tootja ID: 87500744- Fixed output LED driver
- Can be either used built-in or independent with clip-on strain-relief (see accessory)
- Independent LED driver with cable clamps
- Constant current LED driver
- For luminaires of protection class I and protection class II
- Temperature protection as per EN 61347-2-13 C5e
- Output current 900 mA
- Max. output power 40 W
- Nominal lifetime up to 50,000 h
- 5 years guarantee
SKU: 032090
MULTI-PIN konnektor CUC2 2pin, isa
Kondensaator SMD 10nF 50V 0805
Aku GP ReCyko+ 2450mAh 1.2V AA
Minigrip kilekotid 18x25cm 100tk
Lambipesa keraamiline G9 (juhe 12cm)
Metallist väljaviigu mutter M25
Kaabli läbiviik / murdumiskaitse M16 (4-8mm) IP68
Grupilüliti pinnapealne IP44 Malmbergs (hall)
Moodulkilp HT 12 moodulit IP65 255x198x108mm
Dimmer LED 3-60W EMOS
Mootor 230V 33W 1300RPM YZF5-13
Distantspolt M3x40mm
Jätkujuhe 30m must, kummist, m-ga, 3G1,5
PCB Connector 1mm RF7769
Pikendusjuhtme korpus 3-pesa maandusega 16A 250V (must)
Trimmertakisti 4,7K 0,15W 9mm horis.
Hargnemisklemm Al/Cu 80A 16mm²/4x6+2x16mm²
Tööstuspistik 10PIN 16A/500V 0.25..2.5mm2 ema HDC
Liigpingepiirik ALPHA kl.1+2 (B+C) 12,5kA 4P RS
Manipulaator 4 fiks. 0 asendiga
Relay 24VDC/8A JS24K 1xU 2350R
Kaabliside 450x7.6 must IEK 100tk
Teekonnalüliti AH8111 nupp Ø6,8mm
Pesa mono 3,5mm paneelile CA016
Maandusvarda juhtteravik BP 20mm TG 1819/20BP
Toiteplokk DIN-liistule 12V/2A 30W
Pistik CUM3 3pin, isa
Aku Li-polümeer 3.7v 980mah 5.7x34x50mm
Moodulkilp HT 8 moodulit IP65 201x155x90mm
Mootori kondensaator 16uF/450V; juhtmega
Kaas 5P 16A seina- ja kilbipistikule
Optocoupler CNY17II 5k3V 70V 63%-125% DIP6
Puur 6.0mm
Potentsiomeeter 250ohm 16/6 mono lin.
Pesa D-SUB 25pin, nurgaga
Kaablimärgised WIK1 "L1,L2,L3,N,maa" 1,5mm2; D2..2.8mm (200tk/pakk)
Enkooder 24imp/revol; 30000cycles; A/B; 500uA
Tööstuspistik 16PIN 16A/500V 0.75..2.5mm2 isa HDC
Kummist jalg MMP204 9.7x9.7x2mm
Toruklamber 16mm must UV-kindel
Pistik CUM2 2pin, isa
Ceramic capacitor 3,3nF/500V
Trükkplaadi konnektor BTWM20 20pin
Relee 12VDC/10A FINDER 43.41
Ventilaatori metallvõre 60x60mm
Kaabli läbiviik / murdumiskaitse M20 (5.5-12mm) IP68
Traatpotentsiomeeter 2,5K/4W PD5WK002,5
Kondensaator 22pF/100V keraamiline
Kaitse MIDIVAL 100A 





















