Westbalt
Näitan 937–960 tulemust 8346-st
-
Trafod
Toiteplokk LED lampidele 25…40V 900mA 40W Tridonic
Tootja ID: 87500744- Fixed output LED driver
- Can be either used built-in or independent with clip-on strain-relief (see accessory)
- Independent LED driver with cable clamps
- Constant current LED driver
- For luminaires of protection class I and protection class II
- Temperature protection as per EN 61347-2-13 C5e
- Output current 900 mA
- Max. output power 40 W
- Nominal lifetime up to 50,000 h
- 5 years guarantee
SKU: 032090 -
Taimerid
Impulsi lugeja digitaalne LED ANLY 12-48VDC
Tootja ID: A-AH5CK-12-48V• Proximity and photoelectric switch compatible
• Seven-segment-display for clear display and effective monitoring
• Protection against power surge and high frequency interference
• Input signal – active-low or active-high input contact (1+4)
• Reset method – shut-off reset or shorting contact (1+3) instantaneous reset
• Memory switch allows users to enable or disable permanent memory function
• Manual reset button on faceplateSKU: 030110 -
Toiteadapterid
Adapter 24V/2.7A 65W pistik 5.5/2.5mm
Tootja ID: ZSIDT24/2.7-4A-255• Output voltage 24V DC
• Maximum output current 2.7A
• Output connector type 5,5/2,5mm (positive inner pin)
• Power 65W
• Supply voltage 220…240V AC
• Anti-overload, anti-overvoltage, short circuit protection
• Operating temperature 0…40°C
• Length of output cable 1.4mSKU: 030028 -
Klemmid
Hargnemisklemm Al/Cu 160A 35+16mm²/6x16mm²
Tootja ID: LK125A• Increase the number of outputs with one input using a jumper wire
• Tinned copper block allows for copper or aluminum conductor connections
• Screw retaining cover is hinged and removable
• Design allows for visual inspection of conductor and confirmation of connection
• Easily clips onto DIN rail or mounts to panel with screws
• Halogen freeSKU: 026520 -
Klemmid
Hargnemisklemm Al/Cu 250A 690VAC, 2x35mm² + 5x16mm² + 4x10mm²
Tootja ID: LK250A• Increase the number of outputs with one input using a jumper wire
• Tinned copper block allows for copper or aluminum conductor connections
• Screw retaining cover is hinged and removable
• Design allows for visual inspection of conductor and confirmation of connection
• Easily clips onto DIN rail or mounts to panel with screws
• Halogen freeSKU: 030017 -
Klemmid
Hargnemisklemm Al/Cu 160A 70+16mm²/6x16mm²
Tootja ID: LK160A• Increase the number of outputs with one input using a jumper wire
• Tinned copper block allows for copper or aluminum conductor connections
• Screw retaining cover is hinged and removable
• Design allows for visual inspection of conductor and confirmation of connection
• Easily clips onto DIN rail or mounts to panel with screws
• Halogen freeSKU: 029702 -
Klemmid
Hargnemisklemm Al/Cu 80A 16mm²/4×6+2x16mm²
Tootja ID: LK80A• Increase the number of outputs with one input using a jumper wire
• Tinned copper block allows for copper or aluminum conductor connections
• Screw retaining cover is hinged and removable
• Design allows for visual inspection of conductor and confirmation of connection
• Easily clips onto DIN rail or mounts to panel with screws
• Halogen freeSKU: 026521 -
Mikrolülitid
Mikrolüliti 5.2×5.2mm SPST-NO 0,05A/12VDC 2,5N h=1.5mm
Tootja ID: TACTB-64K-F• Contacts configuration SPST-NO
• Switching method OFF-(ON)
• DC contacts rating (at resistance load) 0.05 A / 12 VDC
• Operating Force 2.5N
• Button height (measured from PCB) 1.5mm
• Operating temperature -25…70°CSKU: 030004 -
-
-
Elektriku tööriistad
Metallidetektor EMOS M0501 (pinge,metall,puit)
Tootja ID: M0501Excellent assistant for handymen and professionals alike to prevent accidental drilling into cables in the wall.
• Locate wood, metal, AC wiring
• Signalization: optical + acustic
• Battery: 9V block (included)SKU: 029917 -
