–
Termopastad
Termopasta 7g silikoon
Saadavus:
35 laos
Facilitates the flow of heat between electronic elements and their radiators, necessary for proper functioning of all kinds of temperature sensors, protects against weather factors, prevents from breakdowns, features a very good chemical resistance to oxidation, water solutions of acids, bases, sulfur dioxide, ammonia, features a wide range of operating temperatures: from –50°C to 200°C.
Properties of Thermoconducting Silicone Paste “H”:
Density at 20°C: 1.47 G/cm3, Flash point: 350°C, Freezing point: -50°C, Refraction coefficient: 1.405, Specific heat at 50°C: 0.243 Cal /g K, Overall heat-transfer coefficient at 0-150°C: 0.78 W/m K, Dielectric constant at 100 Hz: 4.7 (±0.1), Cross-through resistance: 5 x 1014 Ohm x cm, Loss tangent at f=100 Hz: 0,020 (±0.003), Operating temperature range: -50~200°C
€1,94 (€2,41 koos KM-ga)
35 laos
Compare–
| Kaal | 0,007 kg |
|---|---|
| Värv |
PIC17C44-16/L 8-Bit CMOS EPROM/ROM 44-pin PLCC
4099 8Bit Adress Latch DIP16
Mootori kondensaator 3,0uF/450V; Ø28x55mm; -25÷70°C; ±5%; 10000h
4538 Dual Mono Multivib. DIP16
Šunt 10A
Kellapatarei 395 SR57
Automaatkaitse 25A 250VAC paneelile, mutriga kinnitus
Pistik D-SUB-HD 15pin
Automaatkaitse 35A 250VAC paneelile, mutriga kinnitus
Potentsiomeeter lülitiga 10K 4mm SP3-4am
Mootori kondensaator 14uF/450V; Ø36x70mm; -25÷70°C; ±5%; 10000h
Patarei GP R6P AA 1,5V Greencell
Makettplaat 72x47mm 371p PC-3
Pesa stereo 6.35mm metall CA036
Surunupp PS12BRD OFF(ON) 250V 1A NO punane
Pöördlüliti XB7 22mm 0-1 1NO 10A/250VAC IP65 must
Peenkiudjuhe 0,22mm2 FLRY-A must
Poteka nupp G19-BU Ø19.5mm/6mm sinine
Pikendusjuhtme korpus 3-pesa maandusega 16A 250V (must)
Ventilaatori metallvõre 120x120mm
Mootori kondensaator 1,0uF/450V; Ø30x57mm; -25÷70°C; ±5%; 3000h
4532 8Bit Prior Encoder DIP16
PIC16C58B-20/P microcontroller; SRAM:73B; 20MHz; 2.5÷5.5V; DIP18
Grupilüliti pinnapealne IP44 Malmbergs (hall)
Aku Li-polümeer 3.7v 800mah 4.5x33x50mm
Kondensaator MKT 1.5nF/63V 




There are no reviews yet.