Kuvatakse 1297–1320 tulemust 8063-stSorted by latest
• with deeply profiled surface.
• esistance against high temperature.
• Inside brass fixation bushing. Locked by means of side locking screw.
• Outside polished, black surface with white pointer.
• Inside hole diameter : 6,4 mm – for 6,3 (6,0) mm shaft
• Material: phenol resin (bakelite)
• Button marking –O
• Contact resistance max.: 35 mΩ
• Electrical life: 10 000 operations
• Temperature range: -30°C to +80°C
• Two positions (stable), single pole.
• Height above panel: 5,8 mm
• Panel cutout: 19,2 x13 mm
• Terminals: push-on connectors 4.8×0.8mm
• Power: 1,8W
• Voltage: 12V
• LED Type: 5630
• LED Quantity: 4
• IP Rating: 65
• Luminous efficiency: >88 lm/W
• Beam angle: 160-180
• Lifespan: 50 000 hrs.
• Working temperature: -40 …85
• Driver position: Outside
• Material: Aluminum PCB, PVC casing
• Contacts rating : 5A/250 V AC
• Contact resistance max : 30 mOhm
• Insulation resistance min. : 100 MOhm
• Life expectancy : 30 000 cycles
• Operatin temperature : -25° to +65°C
• Сonnectors for soldering
Kvaliteetne MOTOMA laetav aku, mis on mõeldud kasutamiseks lampides.
ei sisalda ülekoormus-, tühjenemis- ja lühisekaitseelektroonikat.
Tehnoloogia: liitium-ioon
Mudel: 18650
Nimipinge: 3,7 V
Nimivõimsus: 2600 mAh
Maksimaalne tühjendusvool: 1C (2,6A)
Töötemperatuurid: -20 ° C kuni +45 ° C
kinnitused: 2 tk
freesid HSS terasest: 2 tk
fiiberklaas-elemendid (teralisus: 100# A): 5 tk
liivakettad: 24 tk
liivapaber-kettad: 60 tk
paksus 0.6mm: 36 tk
paksus 0.8mm: 24 tk
hari: 1 tk
freesid (teralisus: 100 #): 6 tk (GC, WA, A)
kummist hoidjad: 1/2×1/2, 1/4×1/2
terasharjad: otsikuga 1 tk, lapik 1 tk
poleerimisrullid: 7 tk
terituskivi: 1 tk
poleerimisriie
liivapaber-trumlid: teralisus 80#, teralisus 120#
Select at least 2 products
to compare
Halogeenlamp MR11 12V 35W 30° GU4 
Pesa stereo 6.35mm metall CA036 
Adapter 12V/0.5A; 6W; Out:5,5/2,1 
Pesa mono 2.5mm CA013 
PRF 505/520 Rooste eemaldaja, aerosool, 520ml 
