Westbalt
Näitan 937–960 tulemust 8366-st
-
Taimerid
Impulsi lugeja digitaalne LED ANLY 12-48VDC
Tootja ID: A-AH5CK-12-48V• Proximity and photoelectric switch compatible
• Seven-segment-display for clear display and effective monitoring
• Protection against power surge and high frequency interference
• Input signal – active-low or active-high input contact (1+4)
• Reset method – shut-off reset or shorting contact (1+3) instantaneous reset
• Memory switch allows users to enable or disable permanent memory function
• Manual reset button on faceplateSKU: 030110 -
Toiteadapterid
Adapter 24V/2.7A 65W pistik 5.5/2.5mm
Tootja ID: ZSIDT24/2.7-4A-255• Output voltage 24V DC
• Maximum output current 2.7A
• Output connector type 5,5/2,5mm (positive inner pin)
• Power 65W
• Supply voltage 220…240V AC
• Anti-overload, anti-overvoltage, short circuit protection
• Operating temperature 0…40°C
• Length of output cable 1.4mSKU: 030028 -
Klemmid
Hargnemisklemm Al/Cu 160A 35+16mm²/6x16mm²
Tootja ID: LK125A• Increase the number of outputs with one input using a jumper wire
• Tinned copper block allows for copper or aluminum conductor connections
• Screw retaining cover is hinged and removable
• Design allows for visual inspection of conductor and confirmation of connection
• Easily clips onto DIN rail or mounts to panel with screws
• Halogen freeSKU: 026520 -
Klemmid
Hargnemisklemm Al/Cu 250A 690VAC, 2x35mm² + 5x16mm² + 4x10mm²
Tootja ID: LK250A• Increase the number of outputs with one input using a jumper wire
• Tinned copper block allows for copper or aluminum conductor connections
• Screw retaining cover is hinged and removable
• Design allows for visual inspection of conductor and confirmation of connection
• Easily clips onto DIN rail or mounts to panel with screws
• Halogen freeSKU: 030017 -
Klemmid
Hargnemisklemm Al/Cu 160A 70+16mm²/6x16mm²
Tootja ID: LK160A• Increase the number of outputs with one input using a jumper wire
• Tinned copper block allows for copper or aluminum conductor connections
• Screw retaining cover is hinged and removable
• Design allows for visual inspection of conductor and confirmation of connection
• Easily clips onto DIN rail or mounts to panel with screws
• Halogen freeSKU: 029702 -
Klemmid
Hargnemisklemm Al/Cu 80A 16mm²/4×6+2x16mm²
Tootja ID: LK80A• Increase the number of outputs with one input using a jumper wire
• Tinned copper block allows for copper or aluminum conductor connections
• Screw retaining cover is hinged and removable
• Design allows for visual inspection of conductor and confirmation of connection
• Easily clips onto DIN rail or mounts to panel with screws
• Halogen freeSKU: 026521 -
Mikrolülitid
Mikrolüliti 5.2×5.2mm SPST-NO 0,05A/12VDC 2,5N h=1.5mm
Tootja ID: TACTB-64K-F• Contacts configuration SPST-NO
• Switching method OFF-(ON)
• DC contacts rating (at resistance load) 0.05 A / 12 VDC
• Operating Force 2.5N
• Button height (measured from PCB) 1.5mm
• Operating temperature -25…70°CSKU: 030004 -
-
-
Elektriku tööriistad
Metallidetektor EMOS M0501 (pinge,metall,puit)
Tootja ID: M0501Excellent assistant for handymen and professionals alike to prevent accidental drilling into cables in the wall.
• Locate wood, metal, AC wiring
• Signalization: optical + acustic
• Battery: 9V block (included)SKU: 029917 -
-
Halogeenlambid
Halogeenlamp E27 42W A55 EMOS EcoClassic
Tootja ID: ZE0703• light color: warm white, 2700K
• replacement of incandescent bulb 55 W
• dimmable
• luminous flux 630 lm
• beam angle >300°
• lifetime 2 000 hours
• number of switching cycles 100 000
• starting time 0 s
• voltage 230 V~/50 HzSKU: 029910