Sensing method: Through-beam
Sensing distance: 0 m to 30 m
Standard sensing object: Opaque: 12 mm dia. Min.
Directional angle: Emitter:3 to 15 DEG
Receiver: 3 to 15 DEG
Light source: Infrared LED (870nm)
Power supply voltage: 12 to 24 VDC -10% to 10% (ripple(p-p) :10% Max.)
Current consumption: Emitter: 15mA DC Max., Receiver: 20mA DC Max.
Control output (Output type): PNP open collector output
Control output (Load current): 0 to 100 mA
Control output (Residual voltage): (DC) 1 V Max. (Load current: Less than 10mA); (DC) 2 V Max. (Load current: 10 to 100 mA)
Operation mode: Light-ON/Dark-ON selectable
Load power supply voltage: 26.4 VDC Max.
Protective circuit: Surge suppressor, Output short-cut protection, Output reverce polarity protection, Power supply reverce polarity protection
Response time: 2 ms Max.
Sensitivity setting: Single-turn adjustment
Ambient illuminance: Incandescent lamp:3000 lux Max., Sunlight:10000 lux Max.
Ambient temperature: Operating: -25 to 55 CEL; Storage: -40 to 70 CEL (with no icing or condensation)
Ambient humidity: Operating: 35 to 85 %RH; Storage: 35 to 95 %RH (with no condensation)
Insulation resistance: 20 M OHM Min. at 500 VDC between charged parts and the case
Dielectric strength: 1000 VAC at 50/60 Hz for 1 minute between charged parts and the case
Vibration resistance: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance: 500m/s2 for 3 times each in X, Y, and Z directions
Degree of protection: IEC60529: IP67
Connection method: Cable length: 2 m
Indicator: Operation indicator(orange), Stability indicator(green), Light indicator(orange)
Weight (packed state): approx. 120 g
Tightening torque: 0.5 N.m Max. (with M3 screw)
Material (case): PBT
Material (lens): Denatured polyarylate
There are no reviews yet.